STN16x4 parallel 5V display module lcd e nang le controller hd44780
Kenyelletso ea Sehlahisoa
| Nomoro ea Mohlala | RXMC-1604B |
| Boholo ba Pontšo | 61.8x25.2mm(VA.) |
| Mofuta | STN |
| BONTŠA SETŠHABA | 16 litlhakuX4line |
| Kaho | COB |
| Sebetsa hajoale | 2.0mA(5.0V) |
| TS'EBETSO MOLELE | 4.8~5.2V |
| backlight hona joale | <20mA |
| Boholo ba sebopeho | 2.95X4.75(WXH)mm |
| Backlight | Botala |
| Mocheso oa ho sebetsa | 0~+50°C |
| mocheso oa polokelo | -20~+70°C |
| Sesebelisoa | Sebopeho, ponts'o ea linomoro bakeng sa printa, lisebelisoa, joalo-joalo |
Ho feta 1604 ho bua ka:
Mosebetsi oa Pin:
| Che. | Letshoao | Taelo ea lipontšo | Che. | Letshoao | Taelo ea lipontšo |
| 1 | VSS | anode ea phepelo ea matla | 9 | D2 | Lintlha tsa I/O |
| 2 | VDD | anode ea phepelo ea matla | 10 | D3 | Lintlha tsa I/O |
| 3 | V0 | LCD bias voltage input | 11 | D4 | Lintlha tsa I/O |
| 4 | RS | data/oda khetha(H/L) | 12 | D5 | Lintlha tsa I/O |
| 5 | R/W | bala/ngola letshwao la taolo(H/L) | 13 | D6 | Lintlha tsa I/O |
| 6 | E | nolofalletsa letshwao | 14 | D7 | Lintlha tsa I/O |
| 7 | D0 | Lintlha tsa I/O | 15 | BLA | anode e khanyang |
| 8 | D1 | Lintlha tsa I/O | 16 | BLK | backlight cathode |
Litšebeletso tsa Rōna
Customization :
| Pontšo | segement, graphic, character monochrome lcd module&TFT amoheloe |
| Mokhoa oa ho bonts'a | TN,STN,FSTN,HTN,transflective,reflective,transmissive, yellow green,blue,gray boikhethelo |
| Mofuta oa ponts'o | COB,COG,TAB |
| Lcd botenya(cm) | 0.11,0.14 |
| botenya ba backlight(cm) | 2.8,3.0,3.3 |
| Sehokedi | Parallel(8bit,4bit,16 bit,80mode,68mode),serial(i2c,spi,uart,usb) |
| Molaoli | Taba ea boikhethelo |
| IC | E-shoa kapa e pakiloeng ka boikhethelo |
| Hardware kapa software | Bohle ba amohetse |
| Boitsebiso bo fanoeng | All idear, sampole, photo, ho taka, sebelisa bukana joalo-joalo li lokile |
1, ke batlaMojule oa LCD o bonts'a linomoro tse 8 mme boholo ba kemiso ke 35mm * 70mm………?
Karabo: Ha ho bothata. Taba ea pele, pls re romelle pampiri ea hau ea ho taka kapa lisampole; re tla hlahisa e loketseng haeba e le lihlahisoa tse tloaelehileng. Kapa re ka fetola ho latela e 'ngoe ea eona.
2,Mojule ona oa LCD ke seo re se batlang, empa se seholo, na u na le saese e nyane?A'me litaba tsa ponts'o li hloka ho fetoloa hanyane.
Karabo: Bakeng sa karolo ea mofuta oa LCD module, haeba u hloka ho fetola boholo ba kemiso kapa lihlahisoa tsa pontšo, LCD glass.mold e ncha e hlokahala. Re tla u tsebisa ka hlobo
tefiso ka mor'a ho tiisa ha u lefa,re tla qala pampiri ea ho taka bakeng sa ho e hlahloba.
3, leseli lena la morao-rao la LCD le botala bo mosehla,empa Ibatla blue backlight.
Karabo: ha ho bothata, re ka u fetola.
4, ke batla ho etsa mojule o mocha oa LCD.Cu etsa'ng?
Karabo: E, re ka khona. Ka kopo, romella pampiri ea hau ea ho taka. Haeba ha u so ka u mpolella boholo ba kemiso ea ponts'o ea LCD, tlhaiso-leseling, haeba ho hlokahala lebone la morao kapa PCB.
boto le IC, Re tla hlahloba litšenyehelomme ke o fe theko haufinyane.
5, Ke eng e etellang pele nako ea ho sebetsa
Karabo: matsatsi a 15 ho isa ho a 30 ka mor'a ho taka pampiri ea netefatso le tefo ea tefo ea lisebelisoa, re ka u bolella nako e nepahetseng ha u tiisa pampiri ea ho taka
6,O ka re romella lisampole hore re li hlahlobe?
Karabo: E,. Odara ea lisampole e teng
7,Ke eng eNako ea ho Eta Pele?
Karabo: Haeba re na le stock bakeng sa tse tloaelehileng, nako e etellang pele ke letsatsi le le leng ka mor'a tefo. Haeba ke tlhahiso ea bongata bakeng sa tse khethehileng, nako e etellang pele ke matsatsi a ka bang 1530.
Haeba re ka qeta pejana, re tla romelalintlha tsa hau esale pele
8 , Ke mekhoa efe ea ho lefa eo u ka e amohelang?
Karabo: Hajoale re amohela T/T feela.